Print Meesho Labels on a Thermal Printer
Crop and size Meesho shipping labels for your thermal printer, then print at the right settings. Free, no signup, and labels stay in your browser.
No signup · no watermark
Thermal printing for Meesho sellers
Why thermal printing is worth it
A thermal printer prints on sticker rolls with no ink or toner. For a seller shipping dozens of parcels a day, a sticker label saves the cost of paper, ink and tape, and it is faster than cutting A4 sheets. The catch is that Meesho gives you an A4 PDF, so it has to be prepared first.
Prepare the PDF
- Download Sub Order Labels from the Supplier Panel.
- Open the free label crop and sort tool and add the PDF.
- Select Crop labels (remove invoice section) so only the label remains.
- Choose a label size that matches your roll: 4 × 6, 3 × 5 or 5 × 5 inch.
- Optionally turn on Print on the label to add the SKU, size, quantity and colour in large type, and a thank-you note.
- Generate and download the PDF.
Printer settings
- Paper size: set a custom size in the driver that matches your sticker roll, for example 100 × 150 mm for 4×6.
- Scale: choose 100% / Actual size. "Fit to page" can shrink the barcode.
- Margins: none, or the smallest your driver allows. The tool already leaves space around the label.
- Orientation: portrait for the usual label layout.
- Print quality: a normal or medium darkness is usually enough. Very dark settings can smudge a barcode.
Check before you print a full roll
Print one label and check three things: the barcode scans, the address is not cut off at any edge, and the text is readable. Only then print the whole batch. Rolls are cheap, but a batch of unreadable labels delays every parcel.
Troubleshooting
| Problem | Likely cause | Fix |
|---|---|---|
| Barcode will not scan | Page was shrunk | Print at 100%, correct the paper size |
| Label cut off at the bottom | Paper size mismatch | Set the driver size to your roll size |
| Faint print | Darkness too low | Increase darkness a step |
| Smudged barcode | Darkness too high or dirty head | Lower darkness, clean the head |
| Several labels on one sticker | Wrong page size | Select the exact custom size |
Keep it private
Labels carry customer names and addresses. The tool works inside your browser, so your files are not sent to a server.
Frequently asked questions
Which thermal printer works with Meesho labels?+
Any thermal printer that prints a standard PDF at the right paper size will do. What matters is setting the driver's paper size to match your sticker roll and printing at actual size.
What roll size should I buy?+
4 × 6 inch is the most common. 3 × 5 and 5 × 5 also work with this tool. See the label size guide for the trade-offs.
Do I have to crop the invoice?+
For sticker printing, yes: you want the label only. The tool can also keep the invoice if you print on A4.
Can I print on normal A4 paper instead?+
Yes. Use the PDF Layout tool to place 2, 4 or 6 labels on one A4 page to save paper.