What the label PDF looks like
When you download labels from the Supplier Panel, the file is usually a PDF where each page holds the shipping label and, on the same page, the tax invoice. For a seller printing dozens or hundreds of parcels a day, that means a lot of wasted paper, ink and time. Printing the whole page also produces a label that is the wrong size for a thermal printer and awkward to stick on a small parcel.
The fix is to crop the page to just the label, and then, depending on your printer, either print it at thermal size or combine several labels onto one A4 sheet.
Option 1: Thermal label printer
A thermal printer prints on a roll of sticky label paper, with no ink. It is the cleanest setup for volume: the label comes out the right size, ready to stick. Many sellers use a 4 by 6 inch (about 100 by 150 mm) roll, but check your own printer's paper size.
To prepare labels for it:
- Open the PDF Crop tool, upload the Meesho label PDF, and draw a box around just the shipping label.
- Download the cropped PDF. The crop applies to every page.
- Print at 100% / actual size and choose the correct paper size in the printer settings.
Never choose "Fit to page" or "Shrink to fit". That shrinks the barcode and can make it hard to scan.
Option 2: Normal A4 printer
If you only have a regular printer, you can still avoid wasting a full sheet on one label. Combine several labels onto one A4 sheet, cut them apart and stick them on the parcels.
The PDF Layout tool does this automatically. It trims the whitespace around each label, then arranges 4 or 6 labels per A4 page with an adjustable gap between them. You print the sheet, cut along the gaps and stick each label on its parcel.
| Layout | Labels per sheet | Best for |
|---|---|---|
| 4 per sheet (2 x 2) | 4 | Larger, easier-to-read labels |
| 6 per sheet (2 x 3) | 6 | Maximum paper saving |
The gap setting matters. A small gap saves space; a larger gap makes cutting easier and keeps the labels from touching.
Checking before you print a whole batch
- Print one sheet first and scan the barcode with your phone
- Check that the address text is fully visible and not clipped at the edge
- Make sure the printer's scale is 100%
- Confirm the paper type matches the setting (plain paper versus label paper)
Ten seconds of checking saves a whole batch of unusable labels.
Sorting labels saves packing time
If you ship many different products, sorting labels by SKU means you can pack one product at a time instead of hunting for the right item per label. The Meesho label crop and sort tool crops and sorts in one step, and the Meesho QR Labels tool can add your shop QR code underneath each label, as described in our guide to putting a QR on shipping labels.
Your labels stay on your device
Labels carry customer names, addresses and phone numbers, so privacy matters. These tools process the PDF in your browser, which means the file is not uploaded to a server. As always, avoid sharing label files publicly.
Troubleshooting
The barcode will not scan. The label was probably scaled down, printed in low quality or has a crease across it. Reprint at 100% with a clean print.
The text is cut off. The crop box was too tight. Redo the crop with a little more margin.
The label is blurry on thermal paper. Raise the print density or darkness setting, and make sure the roll is the right type.
Labels peel off. Press them on a clean, dry, flat area of the parcel, away from creases.
The cost of getting it wrong
A label that will not scan can lead to a failed delivery, and a failed delivery can lead to a return. Taking a minute to print labels correctly is cheap insurance. Packing, labelling and the packaging guide work together: a clean parcel with a clear label is the baseline for fewer problems.
Noor Alam
Founder of Ecomdost · Meesho seller
Noor is a full-stack developer who started selling on Meesho in 2026 and built the first Ecomdost extension to stop re-typing the same listing details. Every tool and guide on this site comes from a problem hit while selling. Read the full story →